Home » Service Areas » South Jersey » Burlington County » Burlington
Burlington Township wraps around Burlington City but governs itself. Roof work for Deacons, Fountain Woods, Springside and Steeplechase.
Burlington Township and Burlington City are separate municipalities with separate construction offices, and plenty of homeowners find that out partway through a project. The township grew from roughly 3,400 people in 1950 to nearly 24,000 today, so most of its housing is postwar. Ranches and split-levels sit nearer Route 130, and cul-de-sac colonials in Deacons, Fountain Woods and Steeplechase fill the ground further out.
We work both sides of that line, and we file where the house actually stands. A township roof gets architectural asphalt, ice-and-water at the eaves and valleys, and ventilation corrected to suit the attic it sits over. Permits and inspections for township addresses go through the Burlington Township construction office under the New Jersey Uniform Construction Code.
The full Maze Roofing range, residential and commercial, from the local team.
Shingle, tile, metal and flat roofing for homes and townhomes across the area.
Shingle, tile, metal, flat and TPO. Managed from tear-off to cleanup.
Flat, TPO and metal systems, with maintenance programs that protect the asset.
Storm damage, active leaks and fallen trees, with 24/7 phone response.
A 1958 ranch on a shallow pitch and a 1995 colonial with three intersecting valleys are not the same job, even when they sit a mile apart.
Low slopes near Route 130 need underlayment choices a steeper roof can skip.
Later colonials funnel a lot of water into few valleys, which wear out first.
Sustained wind finds ridge caps and rake edges that were never sealed properly.
Township addresses are permitted by the Burlington Township construction office, not by Burlington City.
Same office, same crews, a short drive away.
Deacons · Fountain Woods · Springside · Steeplechase · Stevens
It depends which municipality you are in. Burlington Township and Burlington City are separate, each with its own construction office, and the permit follows the property line rather than the postal address. We confirm it from the block and lot before filing so the inspection is scheduled with the right office.
It combines sustained wind with hours of rain from an unusual direction. Water gets driven sideways under shingle courses and into details built for water falling straight down. Ridge caps and rake edges lift first. Proper fastening at the perimeter and a sealed starter course are what hold in that kind of storm.
The shingle matters less than the pitch and the ventilation. Older three-tab on a low slope with a poorly vented attic can be finished in eighteen years. A properly vented architectural asphalt roof on the same house should go well past twenty-five. We look at the attic before quoting the roof.
Yes, and attached housing has its own rules. The termination where your roof meets the neighboring unit has to be flashed and sealed so water cannot track sideways, and scheduling has to account for shared driveways and parking. If an association is involved, we supply the product data it needs.
Send the form and the correct local office follows up, or call your market directly.
Fill out the form and we’ll route it to the right person and location.